DVR Connection N-1640MH Manual de instrucciones descargar pdf (Pagina 109)

 Once you have a straight through cable plug one end into the LAN port on the back of

the recorder and the other into the router.

 Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter

go to the Network Setting Menu.

 If you have a Linksys Router:

 Assign an IP address of 192.168.001.050 to the DVR, a Subnet mask of

255.255.255.000, and a default gateway of 192.168.001.001.

If you have a D-Link Router:

 Assign an IP address of 192.168.000.050 to the DVR, a Subnet mask of

255.255.255.000, and a default gateway of 192.168.000.001.

If you have a pre-existing LAN:

 Go to a Computer on the pre-existing network and do the following:

o Go to Start, then Run and type cmd and click on OK.

 Then hit enter, type ipconfig and press enter this will give you the information you

will need.

 Use the prior step to assign an IP address. For example, if you got the IP address from

the computer of 192.168.002.101. Assign the DVR’s IP address as 192.168.002.050.

Now Copy the subnet mask and default gateway information you got from the prior

step off the computer to the DVR.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 161 162

Sin comentarios

DVR Connection N-1640MH Manual de instrucciones Pagina 109