DVR Connection N-1640MH Manual de instrucciones descargar pdf (Pagina 37)

To set the ending time change of daylight saving time: Choose when the time changes from

the old time (FROM) to the new time (TO) when daylight saving ends.

8. TIME SYNCHRONIZE

Select “ON” or “OFF” to enable or disable time synchronize, which will update the correct time

automatically when network is connected. To change this, simply use the Jog Dial on the DVR.

9. TIME SERVER

You can set the time server address that the DVR connects to for time synchronize. To find the IP

address of NTP Server, please follow these steps:

a) Go to a PC that is connected to the internet.

b) Click on “START” -> “RUN” -> type “cmd” -> press “OK”.

c) In the Dos Prompt, type “ping pool.ntp.org” to find out the IP address of an NTP Server.

Diagram 3.3

10. TIME ZONE

You can set the time zone that the DVR adjusts to when updating from the time server.

Atlantic Daylight Time subtract 3 hours from GMT

Atlantic Standard Time subtract 4 hours from GMT

Eastern Daylight Time subtract 4 hours from GMT

Eastern Standard Time subtract 5 hours from GMT

Central Daylight Time subtract 5 hours from GMT

Central Standard Time subtract 6 hours from GMT

Mountain Daylight Time subtract 6 hours from GMT

Mountain Standard Time subtract 7 hours from GMT

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 161 162

Sin comentarios

DVR Connection N-1640MH Manual de instrucciones Pagina 37