DVR Connection N-1640MH Manual de instrucciones descargar pdf (Pagina 98)

Diagram 10.1

Connection Procedure:

 The First step is to purchase or make a cross over cable. We recommend purchasing one

if you have never made a cross over cable. Please remember you can not use a straight

through network cable for this application

 Once you have a cross over cable plug one end into the LAN port on the back of the

recorder and the other into the network card on the back of the computer.

 Now Log into the Everfocus DVR menu and using the jog dial from the previous chapter

go to the Network Setting Menu.

 Assign an IP address of 192.168.001.003 to the DVR, a Subnet mask of

255.255.255.000, and a default gateway of 192.168.001.001.

 The next step is to get the computer onto the same network to do this you will need

administrator access to your windows machine.

 To assign a static IP address in Windows 2000/XP.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 161 162

Sin comentarios

DVR Connection N-1640MH Manual de instrucciones Pagina 98